Archive: radiator - ProwlerOnline, Plymouth/Chrysler Prowler Discussion Forum

Note: This is an archived topic. It is read-only.

ProwlerOnline, Plymouth/Chrysler Prowler Discussion Forum

Off Topic

radiator

UBBFriend: Email This Page to Someone!

profile | register | preferences | faq | search

This topic was originally posted in this forum: Tires, Rims Discusssion

Author	Topic: radiator
bruce hazelton Prowler Junkie Posts: 299 From: burlington,wi 53105 Registered: DEC 2001	posted 04-13-2005 08:01 PM Anybody in Prowlerland have a connection to replacement radiators for my '54 Chevy sedan delivery street machine with a small block? I'm not looking foward to spending $500 on an original replacement so other alternatives are possible. Thanks. Bruce
WAYNEW Prowler Junkie Posts: 844 From: HOUSTON, TEXAS, USA Registered: AUG 2003	posted 04-13-2005 10:38 PM call evans cooling, 860-364-5130 they did a great job of a custom prowler radiator. steve pressley ------------------
ALLEY CAT Prowler Junkie Posts: 36093 From: Mesa, Az Registered: JUL 2000	posted 04-14-2005 08:26 AM Bruce - if your going to spend that kind of money,,,may as well go to the top: http://www.rondavisradiators.com/
bruce hazelton Prowler Junkie Posts: 299 From: burlington,wi 53105 Registered: DEC 2001	posted 04-14-2005 10:45 AM Thanks for the leads guys. Bruce
WAYNEW Prowler Junkie Posts: 844 From: HOUSTON, TEXAS, USA Registered: AUG 2003	posted 04-14-2005 09:51 PM quote: Originally posted by ALLEY CAT: Bruce - if your going to spend that kind of money,,,may as well go to the top: http://www.rondavisradiators.com/ EVANS HAS THEM IS STOCK, AND COST ABOUT THE SAME AS STOCK BUT IS A MUCH IMPROVED PRODUCT. HAS rondavisradiators.com EVEN MADE A PROWLER RADIATOR OR WOULD IT BE THERE FIRST TIME? ------------------
enduro Prowler Junkie Posts: 235 From: Milwaukee, WI, USA Registered: APR 2003	posted 04-15-2005 09:22 AM You could try Chucks Radiator in Racine. 262-554-1170. Real small shop, but very nice guys. He's one of the guys we race with, and has helped out on numerous similar projects for other folks, and he understands what a budget is all about. If you give Chuck the physical dimensions including inlet and outlet sizes and locations, I'd bet he can come up with something that will work for you.
bruce hazelton Prowler Junkie Posts: 299 From: burlington,wi 53105 Registered: DEC 2001	posted 04-22-2005 06:44 PM Thanks, Bob

All times are CT (US)	This is an ARCHIVED topic. You may not reply to it!

	Hop to:

Contact Us | Prowler Online Homepage

All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP

POA Terms of Service