Home Page Owners Registry Discussion Forums ProwlerMall Event Scrapbooks About
Prowler Products By Gary Tom Mills / Jefferson Auto
Call Gary E at Prowler Products By Gary - Formerly Carlini Design Call Tom for the BEST Park/Turn Signal Relocation Kit

Click here to return to the Prowler Online Board Main Page 		  ProwlerOnline, Plymouth/Chrysler Prowler Discussion Forum
  Technical Questions & Answers
  Bolt pattern, offset for front rims.

Post New Topic  Post A Reply
edit profile | register | preferences | faq | search

   Bottom of Page next newest topic | next oldest topic
Author Topic:   Bolt pattern, offset for front rims.
lavka

POA Site Supporter
Prowler Junkie

From:Marble Falls, Texas
Registered: Jun 2001
Admin Use

posted 09-11-2003 07:48 PM     Click Here to See the Profile for lavka     send a private message to lavka   Edit/Delete Message   Reply w/Quote   Search for more posts by lavka
I want to buy a set of plain steel wheels that will be a drop-in replacement for the prowler front wheels. The new rims must be able to accept the tire pressure sensor and stock run flat tire.
Anybody know what bolt pattern and offset I need to ask for or where to buy these? Its a 17" x 8" rim right?
lavka

POA Site Supporter
Prowler Junkie

From:Marble Falls, Texas
Registered: Jun 2001
Admin Use

posted 09-11-2003 07:55 PM     Click Here to See the Profile for lavka     send a private message to lavka   Edit/Delete Message   Reply w/Quote   Search for more posts by lavka
OK I found this from an old post:

5 bolts on 4.5" bolt pattern
Front 17 x 7.5, 5.5 rear offset / backspace
Rear 20 x 10, 6.25 rear offset / backspace

Is this good info? Any concerns about step-down clearing the brake caliper?


Bob Goetz


POA Site Supporter
Mr. Real Rod

From:Belle Plaine MN USA
Registered: May 2001
Admin Use

posted 09-12-2003 09:06 AM     Click Here to See the Profile for Bob Goetz     send a private message to Bob Goetz   Edit/Delete Message   Reply w/Quote   Search for more posts by Bob Goetz
I was going with Smoothys and wide whites until I got American Racing to make my rims my way, here is a link http://www.whitewallsplus.com/smoothie.htm you can drop to a 15 in the front if and only if they make what I think they call a shallow drop rim by this I mean the outer rim only has about a 1/2 inch step down and you can drop to 17 in the rear, they have 17 wide whites also. Hope this helps.

------------------
< CLICK HERE FOR NEW REALROD.COM PARTS >
< Click on my banner to go to realrod.com >

lavka

POA Site Supporter
Prowler Junkie

From:Marble Falls, Texas
Registered: Jun 2001
Admin Use

posted 09-12-2003 09:56 AM     Click Here to See the Profile for lavka     send a private message to lavka   Edit/Delete Message   Reply w/Quote   Search for more posts by lavka
Thanks Bob.
Bob Goetz


POA Site Supporter
Mr. Real Rod

From:Belle Plaine MN USA
Registered: May 2001
Admin Use

posted 09-12-2003 02:59 PM     Click Here to See the Profile for Bob Goetz     send a private message to Bob Goetz   Edit/Delete Message   Reply w/Quote   Search for more posts by Bob Goetz
also ion the fronts with a 15 inch wheel if I measured right you will only be able to us a 7 or 6 1/2 inch rim width

All times are CT (US)  Top of Page  Previous Page

 Return to Technical Questions & Answers  next newest topic | next oldest topic



Administrative Options: Close Topic |Make Sticky | Archive/Move | Delete Topic
Post New Topic  Post A Reply
Hop to:

Contact Us | Prowler Online Homepage

All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP

POA Terms of Service