 Click here to return to the Prowler Online Board Main Page |
 ProwlerOnline, Plymouth/Chrysler Prowler Discussion Forum
 General Prowler Discussion
 side marker light gasket (Page 1)
|
 ProwlerFriend: Email This Page to Someone!  Click to print this page Bottom of Page This topic is 2 pages long: 1 2 |
next newest topic | next oldest topic |
| Author | Topic: side marker light gasket |
hookers   POA Site Supporter Prowler Junkie From:butler penna. usa |
posted 04-20-2012 05:41 PM
    
just received my set of clear side lights from KLEARS in quebec. no gasket comes with the lights. dose anyone know if you can get new gasket,s or are their any used ones out there.thanks hooker |
catfish          POA Site Supporter Prowler Junkie From:scottsdale,az,usa |
posted 04-20-2012 07:27 PM
the gaskets most likely comes as part of a fact. lite.they are not available seperately,and have no part number.call a knowledgeable dealer and have them check.my parts manual and parts cd donot show the gasket at all.if your that worried about the gasket,get some gasket material and make some.or you can get some automotive strip caulk by 3m and that will seal it also. ------------------ This message has been edited by catfish on 04-20-2012 at 07:31 PM |
ALLEY CAT POA Site Supporter Prowler Junkie From:Mesa, Az |
posted 04-20-2012 11:34 PM
As I recall,,,,and I could be wrong,,,no gasket needed for the side marker lights... |
bjprowler POA Site Supporter Prowler Junkie From:Clarksville,Ohio,USA |
posted 04-21-2012 12:55 AM
I'd be interested in clear sidelights too. Do you have a website address? |
beachcat  POA Site Supporter Prowler Junkie From:Wasaga Beach, Ontario, Canada |
posted 04-21-2012 06:13 AM
The OEMs have a gasket. I managed to salvage one side and had to make the other side out of cork. |
|
ALLEY CAT POA Site Supporter Prowler Junkie From:Mesa, Az |
posted 04-21-2012 07:24 AM
Thanks,,,,,I stand corrected then..... didn't remember there being a gasket. |
VinceM POA Site Supporter Prowler Junkie From:SoCal |
posted 04-21-2012 08:54 AM
You can find the lens at this site http://www.klearz.com/chrysler.html This message has been edited by VinceM on 04-21-2012 at 08:55 AM |
|
beachcat POA Site Supporter Prowler Junkie From:Wasaga Beach, Ontario, Canada |
posted 04-21-2012 05:08 PM
quote: Actually I don't see a gasket listed in my parts manual. But when I replaced mine with clear lamps, they had gaskets. |
|
beachcat POA Site Supporter Prowler Junkie From:Wasaga Beach, Ontario, Canada |
posted 06-13-2012 07:10 PM
There is a gasket. I can make these if anyone needs a set.
|
|
hookers POA Site Supporter Prowler Junkie From:butler penna. usa |
posted 06-13-2012 07:45 PM
hay beachcat, i would like to buy 2 sets of gaskets for side lights. please e mail me with cost and your mailing address. geohill@embarqmail.com . thanks hooker |
George Johnson POA Site Supporter Prowler Junkie From:Houston, TX USA |
posted 06-13-2012 09:01 PM
Hey Beachcat, I would like a set. Please PM me price & delivery and I will give you my address for shipping. Thanks! |
|
beachcat POA Site Supporter Prowler Junkie From:Wasaga Beach, Ontario, Canada |
posted 06-13-2012 09:19 PM
I can't pm. $10 per set plus shipping which should be the cost of a US stamp. So $12 per set should cover it. |
|
beachcat POA Site Supporter Prowler Junkie From:Wasaga Beach, Ontario, Canada |
posted 08-10-2012 02:35 AM
These are now available as a regular item. George, I just noticed your thread and I apologize. Let me know if you still want them. They are $15 per set in cork or foam. I made a couple of sets for Hookers and he is good with them. |
JOYRIDE POA Site Supporter Prowler Junkie From:Moncton N.B. Canada |
posted 08-10-2012 08:57 AM
I bought a set of clear lens's with white housings, and the wife doesn't like them. Wonder if I should have got the black housing to make it look more clear? Is everyone ordering the black or white housing? Just curious |
BeWare POA Site Supporter Prowler Junkie From:Acworth,GA,USA |
posted 08-10-2012 11:21 AM
quote: I purchased a set with white housing and took them apart and painted the backing purple to match the car. |
|
JOYRIDE POA Site Supporter Prowler Junkie From:Moncton N.B. Canada |
posted 08-10-2012 05:54 PM
quote: Thats maybe what i'll do Rich, Thanks |
|
beachcat POA Site Supporter Prowler Junkie From:Wasaga Beach, Ontario, Canada |
posted 08-10-2012 05:59 PM
Gluing them back together is a messy pain. |
|
catfish POA Site Supporter Prowler Junkie From:scottsdale,az,usa |
posted 08-10-2012 06:07 PM
glue back together with 100 percent clear silicone and you wont have a mess. ------------------ |
|
JOYRIDE POA Site Supporter Prowler Junkie From:Moncton N.B. Canada |
posted 08-10-2012 06:26 PM
Thanks guy's, I'll try that  |
|
George Johnson POA Site Supporter Prowler Junkie From:Houston, TX USA |
posted 08-10-2012 09:20 PM
quote: OK...is the price $10, $12, or $15 per set? |
|
beachcat POA Site Supporter Prowler Junkie From:Wasaga Beach, Ontario, Canada |
posted 08-10-2012 09:24 PM
quote: Does it really matter? Whatever you want to pay George. |
|
JOYRIDE POA Site Supporter Prowler Junkie From:Moncton N.B. Canada |
posted 08-12-2012 09:09 PM
Tried taking a pocket knife to get the lens off the housing but no luck. Man it's like their fused together, and I don't want to ruin them Wonder if their is something I could soak them in ? |
|
beachcat POA Site Supporter Prowler Junkie From:Wasaga Beach, Ontario, Canada |
posted 08-16-2012 08:52 PM
I don't think soaking would help but heating might. I would try a heat gun but not too much. If heat doesn't help, I would abandon that idea. You could try one of the vinyl overlays with the cat cut-outs to change the look. |
|
JOYRIDE POA Site Supporter Prowler Junkie From:Moncton N.B. Canada |
posted 08-16-2012 09:02 PM
Their's an idea Tks |
|
catfish POA Site Supporter Prowler Junkie From:scottsdale,az,usa |
posted 08-16-2012 10:02 PM
only way to seperate the lens fro the housing is with a small thin grinding disc. ------------------ |
This topic is 2 pages long: 1 2 All times are CT (US) Top of Page Previous Page | Return to General Prowler Discussion next newest topic | next oldest topic |
  |
|
Contact Us | Prowler Online Homepage
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP
