Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
Prowler Products By Gary | Tom Mills / Jefferson Auto |
Bottom of Page | next newest topic | next oldest topic |
Author | Topic: oil pressure reading faulty |
IM IN XTC unregistered Admin Use |
posted 02-18-2007 10:14 AM
having some really high and really low oil pressure readings .... there is oil ... why |
catfish POA Site Supporter Prowler Junkie From:scottsdale,az,usa |
posted 02-18-2007 11:10 AM
oil pressure sending unit,or oil pump.most likely the su.its next to the oil filter.a low should be 3/8 on the guage,high is 3/4. ------------------ This message has been edited by catfish on 02-18-2007 at 11:11 AM |
KRK Prowler Newbie From:Highlands Ranch, CO |
posted 02-18-2007 11:13 AM
My 2001 does the same thing? The DC dealer on Broadway says this is normal??? Hard for me to belive... |
TLRandall POA Site Supporter Prowler Junkie From:CALDWELL, TX, US |
posted 02-18-2007 01:13 PM
My Mulholland is all over the place, when it actually shows a reading at all. It's the sending unit, I just never have replaced it! ------------------ |
IM IN XTC unregistered Admin Use |
posted 02-21-2007 01:15 AM
does this make a difference to the oil in the motor |
TLRandall POA Site Supporter Prowler Junkie From:CALDWELL, TX, US |
posted 02-21-2007 08:18 AM
Nope, it is just the sending unit that signals the gauge. My local Dealer says that there is a problem with the design, the plastic housing allows moisture to build up in the sending unit, causing it to send faulty readings. ------------------ |
392HEMI POA Site Supporter Prowler Junkie From:The Villages, Fl. |
posted 02-21-2007 09:18 AM
Just a word of caution here. IF you are going to replace the sending unit yourself, be VERY CAREFUL threading and tightening it up. Spec's. call for 200 INCH POUNDS torque. That equates to about 16 FOOT pounds. If this strips out the aluminum block, you just bought a short block. OUCH!! |
PROWLEU Prowler Junkie From:Marietta, GA USA |
posted 02-28-2007 06:38 AM
quote: Oil pressure does not equate to amount of oil. You may have enough oil and the pressure is low - indicating (in most cases) a bad sending unit or faulty oil pump. |
All times are CT (US) Top of Page Previous Page | Return to Technical Questions & Answers next newest topic | next oldest topic |
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP