If you have previously registered, but forgotten your password, click here.

T O P I C     R E V I E W
BeWare	We received our clear side markers from Dale. I tried using purple bulbs in them, but they lit up very pink, So I went with amber bulbs. This message has been edited by BeWare on 09-19-2004 at 02:33 PM
pumpkin	Very nice. ------------------ Current mods: Mopar dual exhaust & front mudflaps; MacMotorsports Air Intake; Real Rod Air Patrol; Graphics by Balistek Designs; ($8) Chrome grille; Chrome tire valve-stem covers; Painted rear bumper lettering; Prowler Pro Gears; Synthetic Oil; Raybestos Ceramic Brake Pads; TGF Door Panel Inserts & Headrest Covers; SheepskinExpress Sheepskin Seatcovers; Grille Light; Pinstriping by Bo Boring; Painted Valve Cover; Window Tinting; Windshield Visor Banner; Front Bumper Removal / Relocation of Front Turn Signal Lights; Real Rod Transmission Cooler Cover, Sill and Carpet Covers, Aero Front Covers and Roadster Rear Pan, rear bumpers removed; rear mudflaps; painted calipers; Prowler Products by Gary Drilled Rotors, front and rear; Painted tach; Jay's Aluminum Billet Center Caps w/shimmers, Chrome Lugnuts and Chrome Radio Bezel Shimmer; Dash Rings; Windshield Wiper Arm Removal; Fender Trim; Speaker Replacement; Painted Plenum; Painted Radiator Crossmember; Painted Rear Mudflaps; Air Patrol graphics; Aluminum engine compartment support bars; PlasmaGlow 7-color LED Underbody Kit; Dash Designs Dash Mat; Airbrushed Rear Trim Panel and Painted Headlight Caps. More 'Pumpkin' photos . . . . . More cars and other stuff New pictures in Personal Scrapbook (02/23/03) "I may have to grow older, but I do not have to grow up!" "The Prowler is not a car to go from Point A to Point B. The Prowler is the Point!"
Nasty Cat	Have you tried blue bulbs? This message has been edited by Nasty Cat on 09-20-2004 at 07:46 PM
tangled up in BLUE	looks good Rich.....WAY better than the ambers....
weswman	Beware, do you have any pics of your seats?
ALLEY CAT	Rich - Much cleaner look with the clear side marker lights. DC should have thought and reacted to that after the '97's were built.
Orange	Very cool! You want to sell (maybe give away) your orange side markers?
Chromer	The clear side marker lenes stick out too much. I like the original amber better. JMO
BeWare	quote: Originally posted by weswman: Beware, do you have any pics of your seats? Here you go. Since these pictures were taken I have added chrome headrest covers. This message has been edited by BeWare on 09-19-2004 at 05:31 PM
BeWare	quote: Originally posted by Chromer: The clear side marker lenes stick out too much. I like the original amber better. JMO Chromer, they are very brite. I am thinking of using a chrome shimmers with the cat cut out to soften the look some.
BeWare	quote: Originally posted by Orange: Very cool! You want to sell (maybe give away) your orange side markers? Sorry they are not for sale.
DUSTI	Wow - what a difference !! I always HATED those orange blobs, especially on the darker colors like the purple, blue or black - even on the silver cats that orange blob's just annoying !! Rich, try blue bulbs - they worked pretty good for us !!
George Maxey	HEY!!! Pank is a good thang! No NOPI this weekend, scared of the rain and it's time for the stereo and TV's. We're tryin' to get ready for an Oct/NOv trip to Las Vegas. Keep up the good work! See ya in Daytona Beach. George
weswman	Beware, those seats look great! Really dresses up the interior. How did you do it? Did you just cover the original leather or take off the original? What was used for the kat? E-mail me with the details. Really looks great. Wes This message has been edited by weswman on 09-19-2004 at 08:26 PM
DIXIE Cat	quote: Originally posted by George Maxey: HEY!!! Pank is a good thang! No NOPI this weekend, scared of the rain and it's time for the stereo and TV's. We're tryin' to get ready for an Oct/NOv trip to Las Vegas. Keep up the good work! See ya in Daytona Beach. George Does that mean you are not going to join us on the west coast this weekend???? Nancy
ed monahan	Rich, Dale said something about painting the bulbs so they wind up closer to the color. I put in red and they are a little on the pink side. I haven't tried nail polish or paint on them yet. Dale said he bought some Purple, I think, that didn't look purple until he turned them on. Hopefully he will see this and straighten out all of my errors.
Joseph Mark	Hi Rich, Can you e-mail me info.and cost on the seat covers. They look great. Thanks in advance. Joseph
Marty Usher	Joseph - Rich's seats were done by the same guy I used for mine - James Comstock here in Louisville. First we both had a set of new foam seat cushions from a run that Real Rod had made several years ago. I don't think Bib has any cushions left but you can contact him to ask. Some people have found loacl sources to have cushions custom cut. I can't remember the price per seat - maybe Rich will post - I think it was something like $350 per seat plus the purchase of the leather hide.
BeWare	Labor $250 each seat. Material $460, Dye the headrest $24 for the pair. I had to pay a sizable set up fee for the embroidery. Now that the set up fee is paid, I think the embroidery will be around $20 per seat. For the console lid $40. I also purchased another console lid to have covered at around $58 plus shipping. I also had to pay for the seat foams. If you can't get a set of foams then you will have to pay to have the leather on you old seats peeled off the old foams.
marks2000woodward	looks sweet!!!!!!!!!! very nice
Dale Beaman	Ed & Rich, The bulbs I got looked purple but were dark red when on. I got them at O'Reiley's. Check with them they may have a true purple bulb. Dale
SPCL-T	Rich - Your making it awfully hard to "keep up w/ the Jones," w/ all your mod's the past few years. Your Kat is looking outstanding!
RPL	Rich, Did you make the door prop in the photo above? I assume it is to keep the door from closing and being opened too far.
BeWare	quote: Originally posted by RPL: Rich, Did you make the door prop in the photo above? I assume it is to keep the door from closing and being opened too far. Bob, Eddie Powell made the door prop rod. It is made of aluminum dowl rod and polished. Its really a pretty simple design. I will post pictures if your interested. The one I have was made before we made our doors open wider. I use it in car shows. I was getting allot of finger prints and people leaning on the doors to see inside the car. Now they can see inside without touching the car and the rod also keeps anyone from just hoping inside while the door is open. Eddie made another design for the wider opening doors but I don't have one of these. At least not yet This message has been edited by BeWare on 09-20-2004 at 07:44 PM