Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
Prowler-Parts.Com | Prowler Products By Gary | Tom Mills / Jefferson Auto | Prowler-Products Trunks |
Bottom of Page This topic is 3 pages long: 1 2 3 |
next newest topic | next oldest topic |
Author | Topic: Passenger seat risers |
Rick Buehler POA Site Supporter Prowler Junkie From:St.louis,mo. USA |
posted 05-30-2008 03:48 PM
Greetings to all! I have all sizes in stock now if anyone is in need of a set. The prices haven't changed. 1 inch $75, 1 1/2 inch $100 and 2 inch $125 plus $13.50 shipping. You can PM are call me. Thanks Rick-B Thank you for your interest in my seat risers. I will be at the Nursing Home Nationals in September and in Las Vegas in May. They are also available by contacting me and I will ship them to you. pm me with any questions you may have. Take care and enjoy prowling! During my cabin fever, I developed these passenger seat risers. I developed them so that you can raise the seat anywhere from 1/2" to 2", and even higher if you wanted. If there is enough interest, I would be willing to make these. The pricing would start around $75.00 + shipping and go up depending on sizes. Pictured below are examples of the seat at the different heights and risers alone. If you would be interested please pm me or post a reply. 1/2" riser 1" riser 1 1/2" riser rails 2" riser rails I will be in Branson, Mo for Prowlin' the Ozarks event and will have the 4 sizes in 4 different Kats for anyone thats interested to see and try. Looking forward to hearing back from some of you with your comments and interest!! This year I added two more styles inch and a half 2 inch solid risers. Rick-B This message has been edited by Rick Buehler on 03-09-2018 at 02:27 PM |
Pantera POA Site Supporter Prowler Junkie From:Connecticut |
posted 05-30-2008 03:52 PM
Rick Buehler.....Always the inovator Nice Job Rick!! ------------------ ProwlerStuff.com |
Michael T POA Site Supporter Prowler Junkie From:Chesterfield, Michigan |
posted 05-30-2008 04:05 PM
Great job! I bet C.J. will want to purchase a couple of 2" sets so she can throw away those phone books. LOL Michael T. Live like you were dying ! |
jjprowler POA Site Supporter Prowler Junkie From:Ormond Beach FL.USA |
posted 05-30-2008 06:14 PM
Good job Rick, you got me thinkin can the seats be swaped left to right and right to left so I could put even wear on them? |
catfish POA Site Supporter Prowler Junkie From:scottsdale,az,usa |
posted 05-31-2008 08:24 AM
the cushions can,not the adjusters.you will have to remove the seats to do the transfer. ------------------ This message has been edited by catfish on 05-31-2008 at 09:00 AM |
VinceM >POA Site Supporter Prowler Junkie From:Mission Viejo, CA, USA |
posted 08-03-2008 09:55 PM
Installed my 1 1/2 in. seat risers on Sat. The install was very easy and straight forward. Did a short cruise along the coast today with the wife to get her feedback on the increased visibility. She says it is the best mod I've ever done. So, if your wife is vertically challenged this is the mod to do. |
02Kandy Prowler Newbie From:St. Louis, MO. USA |
posted 08-11-2008 09:30 PM
Rick Buehler just installed seat risers for my wife under the passenger side seat. She said it is unbelieveable the difference it made on getting in and out of the car. She can see over the door and out of the windshield much better. She is 5'5" and got the 1-1/2" risers. It is perfect!!! What an inovative idea for the passenger seat. My wife is telling everyone about it and having them try it out. Thanks Rick B. |
SHELBYVIPER Prowler Enthusiast From:COLUMBIA STATION.OHIO USA |
posted 09-07-2008 01:45 PM
Rick, PM sent. Thank's, Frank |
mccombcliff Prowler Enthusiast From:Livonia, Michigan USA |
posted 09-08-2008 10:16 AM
What size is required to make the passenger side equal in height to the driver? |
JOYRIDE POA Site Supporter Prowler Junkie From:Moncton N.B. Canada |
posted 09-08-2008 05:37 PM
quote:Yes, what mccombcliff said |
VinceM >POA Site Supporter Prowler Junkie From:Mission Viejo, CA, USA |
posted 09-08-2008 10:06 PM
To make the passenger seat equal in height to the driver you will first have set the height of the driver seat where you want it. I then placed a 4 ft. level on top of the driver head rest and held it over the passenger head rest. With the bubble centered and indicating level I measured the distance from the bottom of the level to the top of the head rest to find the riser size needed. |
JOYRIDE POA Site Supporter Prowler Junkie From:Moncton N.B. Canada |
posted 09-09-2008 04:55 PM
Thanks Vince, for that. So obvious, when you articulate it that well. This message has been edited by JOYRIDE on 05-23-2015 at 01:13 PM |
BalloonMan POA Site Supporter Prowler Junkie From:Lebanon, OH, USA |
posted 09-09-2008 09:46 PM
Rick - I'm interested... do you have to assemble an order, or do you have them "in stock"? Count me in for an order. Probably the 2" version. Brian ------------------ |
SHELBYVIPER Prowler Enthusiast From:COLUMBIA STATION.OHIO USA |
posted 10-14-2008 12:00 AM
Hi Rick, PM sent. Riser's worked out perfect. Thank's again. Frank, |
Rick Buehler POA Site Supporter Prowler Junkie From:St.louis,mo. USA |
posted 06-05-2009 02:27 PM
I will also have shims for doors opening wider. And will install these and seat risers if time permits. Rick-B |
Rick Buehler POA Site Supporter Prowler Junkie From:St.louis,mo. USA |
posted 09-30-2009 12:04 PM
I will also have shims for doors opening wider. And will install these and seat risers if time permits. Rick-B |
JeraneW POA Site Supporter Prowler Junkie From:Hilton Head, South Carolina , USA |
posted 09-30-2009 08:12 PM
I posted a reply on another thead, but in case you did not ge it, I will want both seat riser (probably 2"?)and door shim if you have time to install. Thanks, Jerry Wick |
DON WIEBER POA Site Supporter Prowler Junkie From:Avon, mn, us |
posted 10-02-2009 08:27 AM
if you can sit in a cat that has the height of the riser you want to install. sherry found out that it raised it to high so she was looking into to the top of the windsheild bar. |
JeraneW POA Site Supporter Prowler Junkie From:Hilton Head, South Carolina , USA |
posted 10-12-2009 07:16 PM
Rick installed a set of 1 1/2 at the Smokey event. Made my wife extremely happy. Rick is professional. |
Frank POA Site Supporter Prowler Junkie From:east setauket ny |
posted 10-12-2009 08:16 PM
Rick, Has anyone developed one for the challenger, 09 SRT, Passenger seat, is extremely low. Thanks, Frank |
jkprowlin POA Site Supporter Prowler Junkie From:Haverhill, MA |
posted 06-30-2011 01:21 PM
Rick, Are you still selling the seat risers ? Thanks |
padroo POA Site Supporter Prowler Junkie From:Chesterton, IN, USA |
posted 06-30-2011 07:06 PM
I didn't raise my seat, I got a taller wife this time!!!!!!!!!!!!!!Type your text here |
jkprowlin POA Site Supporter Prowler Junkie From:Haverhill, MA |
posted 07-01-2011 06:54 AM
The seat risers would be a better option for me !!! |
JeraneW POA Site Supporter Prowler Junkie From:Hilton Head, South Carolina , USA |
posted 07-01-2011 09:00 AM
I have stayed with the same wife for over half century and adjusting the seat height was cheaper than starting over with a new one considering the investment I have already made. LOL |
alrtg POA Site Supporter Prowler Junkie From:Westminster, MD, USA |
posted 07-01-2011 06:31 PM
quote:
|
This topic is 3 pages long: 1 2 3 All times are CT (US) Top of Page Previous Page | Return to Prowler Performance/Appearance Discussion next newest topic | next oldest topic |
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP