| Prowler Products By Gary | Tom Mills - Plymouth Prowler Parts |
 |
 |
| Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
| Prowler Products By Gary | Tom Mills - Plymouth Prowler Parts |
|
|
 Click here to return to the Prowler Online Board Main Page |
 ProwlerOnline, Plymouth/Chrysler Prowler Discussion Forum
 Prowler Reproduction Parts Discussion
 Vertical Stablizer Links (Page 2)
|
| Bottom of Page This topic is 4 pages long: 1 2 3 4 |
next newest topic | next oldest topic |
| Author | Topic: Vertical Stablizer Links |
spoons       POA Site Supporter Prowler Junkie Personal ScrapBook From:JUPITER, FL, United States |
posted 06-14-2018 10:42 AM
    
I have 4 sets in stock |
dbudner From:Dallas, GA, US |
posted 06-23-2018 07:13 AM
quote: These links are a great product. What I will say is take the time to polish them before you install them. Doesn't take much and makes an already great product look good. |
|
spoons POA Site Supporter Prowler Junkie Personal ScrapBook From:JUPITER, FL, United States |
posted 02-04-2019 08:30 PM
I have several sets in stock ready to be shipped to you. I had to slightly increase to cost by $5 to offset the higher metal prices (I assume increased trade tariffs). |
|
spoons POA Site Supporter Prowler Junkie Personal ScrapBook From:JUPITER, FL, United States |
posted 03-27-2019 09:22 PM
I have 8 sets in stock |
|
spoons POA Site Supporter Prowler Junkie Personal ScrapBook From:JUPITER, FL, United States |
posted 05-16-2019 01:56 PM
I have 8 sets in stock |
|
Mulholland 01 From:West Palm beach |
posted 06-14-2019 06:23 PM
Just purchased a set. Looking forward to receiving them. Thanks |
luch         POA Site Supporter Prowler Junkie From:Newmarket, Ontario, Canada |
posted 06-17-2019 08:20 AM
do you have a set in stock ? would require shipping to canada toronto area , thanks mike |
|
cagey2 From:North Vancouver, BC, Canada |
posted 07-10-2019 10:59 AM
Would like to buy a set. In Vancouver, Canada Ken |
|
cagey2 From:North Vancouver, BC, Canada |
posted 07-10-2019 11:36 AM
Just ordered a set. Ken |
ALLEY CAT         POA Lifetime Site Supporter Prowler Junkie From:mesa, Arizona, USA |
posted 08-07-2019 08:14 AM
Replace with these ....quality and appearance approved: .
|
|
cagey2 From:North Vancouver, BC, Canada |
posted 08-07-2019 08:01 PM
I already replaced them. Looks better and bushings are new again. |
|
spoons POA Site Supporter Prowler Junkie Personal ScrapBook From:JUPITER, FL, United States |
posted 10-16-2019 07:20 PM
Move up |
Marty Usher POA Site Supporter Prowler Junkie From:San Antonio, Texas, United States |
posted 10-16-2019 11:06 PM
An unsolicited plug: But them....you won't be sorry.....so much higher quality than stock pieces |
|
spoons POA Site Supporter Prowler Junkie Personal ScrapBook From:JUPITER, FL, United States |
posted 01-04-2020 04:13 PM
I have 4 sets in stock |
|
JasonA From:Tampa, Florida, US |
posted 03-04-2020 12:00 PM
Just sent an order over |
ZuluProwler POA Site Supporter Prowler Junkie From:Suwanee, GA, USA |
posted 03-04-2020 03:17 PM
I'm busy ordering. Hopefully still available. |
|
ZuluProwler POA Site Supporter Prowler Junkie From:Suwanee, GA, USA |
posted 03-04-2020 07:58 PM
So, in expectation of needing a complete new system, I stripped out my old (brand new) arms. Apart from the boots, they are pristine. They even look brand new once cleaned up. I washed out all the old grease, prised off the old boots, removed the silicone residue and checked for smooth action. All good. I now need new boots and grease. I hope to find these at my local stores. Or something I can adapt. I'm striving to keep the look (OEM) with only perished (replacements) bellows being added. I think I can do it. The range of motion is very limited, the duty cycle is low, so a little grease and some boots should work. |
|
ZuluProwler POA Site Supporter Prowler Junkie From:Suwanee, GA, USA |
posted 03-04-2020 08:22 PM
Polished arms with rose joints add bling and functionality and I'll buy them for that reason. But, maybe, our old arms are not past their sell-by date? |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 03-04-2020 09:03 PM
I think Dick Linnemann found something. I had gotten a message from him about a month ago with a picture attached but when I tried to open it, it disappeared. I forgot all about it until I just read that last post. I will attempt to ask him what it was all about, if I can remember to. |
|
ZuluProwler POA Site Supporter Prowler Junkie From:Suwanee, GA, USA |
posted 03-06-2020 04:13 PM
Well, I'm now officially at a standstill. It is impossible to get the boots locally IMHO. There are perfect items available from Bulgaria with a long delivery time: https://polyboots.com/ I've ordered some closeout items from RockAuto that might work but it's a long shot. I'm going to order from PolyBoots just to prove the source and quality but the entire effort is just time wasted. Summit Racing was my last attempt today and they were less than helpful or enthusiastic even though I visited the store. It's not over yet but it sure is a losing battle. Spoons solution looks really good now! |
|
ZuluProwler POA Site Supporter Prowler Junkie From:Suwanee, GA, USA |
posted 03-06-2020 05:06 PM
The PolyBoots are on the way. I found what might be an even better solution if, like me, you found that your Heim joints were good but just needed lube and protection. If these work, and at the price, they might be a really good alternative to a full replacement: https://www.3sx.com/rubber-boot-cover-for-spherical-heim-joint-rod-ends-on-control-arms I've ordered the 1/2" version. Once I get the parts I'll post some images and hints about what I found during strip and assembly. This message has been edited by ZuluProwler on 03-06-2020 at 05:16 PM |
garysss POA Site Supporter Prowler Junkie From:Baltimore, MD, United States |
posted 03-06-2020 06:25 PM
quote: |
|
garysss POA Site Supporter Prowler Junkie From:Baltimore, MD, United States |
posted 03-06-2020 06:26 PM
This looks like a great find.
quote: This message has been edited by garysss on 03-06-2020 at 06:36 PM |
|
ZuluProwler POA Site Supporter Prowler Junkie From:Suwanee, GA, USA |
posted 03-07-2020 04:28 PM
Blowout #1: As predicted, the RockAuto parts were nothing like what was shown on the website so that's a dead end. Chalk up $20 to the science experiment. Now waiting on the PolyBoots and the 3SX Heim joint cover. Perhaps that'll be more successful. Blowout #2: The 3SX 1/2" boots would work but are too small. I've pulsed them to give me dimensions before I try again, if at all, using the 3/4" versions. That makes $40 in the name of science so far! This message has been edited by ZuluProwler on 03-11-2020 at 12:40 PM |
Mt Badkat From:BILLINGS, MT, United States |
posted 03-25-2020 09:46 PM
Are these still available? Thanks |
This topic is 4 pages long: 1 2 3 4 All times are CT (US) Top of Page Previous Page | Return to Prowler Reproduction Parts Discussion next newest topic | next oldest topic |
  |
|
All material contained herein, Copyright 2000 - 2020
