Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
Bottom of Page | next newest topic | next oldest topic |
Author | Topic: Wheel Center Cap Fix |
TucsonJer POA Site Supporter Prowler Junkie From:Tucson, AZ, USA |
posted 10-13-2015 01:56 PM
I'm posting in hopes that Ed Monahan reads it and can give me an answer. I looked in a post that was from 2011 where Ed said there is a gentleman in Cincinnati OH. that has a sure fired fix for center caps that are broken. There's an address listed for Dick Linneman. My question is, does he still do it and is the price still $100 + $10 for shipping? If he does I'll send them out today. Also what form of payment does he require? |
ALLEY CAT POA Lifetime Site Supporter Prowler Junkie From:mesa, az, USA |
posted 10-13-2015 01:58 PM
Hi Jer, Yes, Dick still does the center cap 'fix', and does an excellent job. Ed will chine in when he wakes up this afternoon.....he's a night owl. ------------------------------------------------------------
Repair is $ 30 for one plus $10 shipping This message has been edited by ALLEY CAT on 10-13-2015 at 02:03 PM |
Dave Haggas Prowler Junkie From:united kingdom |
posted 10-13-2015 02:01 PM
Best fix ever. I had Dick sort this out for me through Ed. Ed is the man that made this possible for us Prowler owners. I had all six of mine done. You won't be disappointed. |
TucsonJer POA Site Supporter Prowler Junkie From:Tucson, AZ, USA |
posted 10-13-2015 03:15 PM
Thanks so much for the speedy replies. I was washing the Prowler this morning and when I started drying the right rear wheel, it popped loose and practically fell off in my hand. Sure was glad that it didn't come off while driving down the road. Will get them mailed out tomorrow. I love this forum! |
alrtg POA Site Supporter Prowler Junkie From:Westminster, MD, USA |
posted 10-13-2015 04:08 PM
quote: Just a suggestion here..... You may want to give some serious consideration to having ALL of your center caps done at the same time. It is my opinion that it will save lots of time and aggravation in the long run. |
TucsonJer POA Site Supporter Prowler Junkie From:Tucson, AZ, USA |
posted 10-13-2015 04:51 PM
I agree completely, you know what they say about an ounce of prevention. |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 10-13-2015 05:36 PM
Jer, I was playing golf and it takes a LOOOOONG time when you take as many strokes as I do. lol Dick will take care of you and you will be happy with the result. Sorry about the delay from ME but as usual, everyone stepped up to help out. |
TucsonJer POA Site Supporter Prowler Junkie From:Tucson, AZ, USA |
posted 10-13-2015 07:22 PM
Thanks Ed, glad to hear you were outside enjoying yourself. Won't be long before it'll be to cold for golf. Everybody was very helpful and I'm proud to a part of such a wonderful bunch of people. The amount of knowledge about Prowlers in this group is amazing. Thanks to all who replied. PS. If you talk to Dick, let him know my caps will be on their way tomorrow. |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 10-13-2015 09:52 PM
Thanks. I might be over to his shop tomorrow. |
TucsonJer POA Site Supporter Prowler Junkie From:Tucson, AZ, USA |
posted 10-14-2015 02:00 PM
I shipped them out today via the United States Post Office. Thanks for everything. Jer. |
Richard Jackson POA Site Supporter Prowler Junkie From:Fairfield, Ohio |
posted 10-15-2015 11:45 AM
+1 to getting all of your caps fixed and a trailer too if you have one. Dick is a great guy and does a 100+ % job. |
TucsonJer POA Site Supporter Prowler Junkie From:Tucson, AZ, USA |
posted 10-15-2015 12:33 PM
I don't have a Prowler trailer but I do have a real nice little cargo trailer that I pull behind my Goldwing. I'm pretty sure I could pull that behind the Prowler. I have the receiver hitch on the Prowler but no wiring harness. The original owner bought the factory fold down luggage rack and bag for it when he bought the Prowler. |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 10-15-2015 04:19 PM
I got over to Dick's today finally. I told him they were enroute. I shipped two last week that said they would be there by Saturday and didn't arrive until Tues. About a month ago, the young guy who bought Mac's lost one and I shipped it right away. It took almost two full weeks but it had to go almost 50 miles north to the Dayton area!!!! The last few that went to Canada took 10 to 14 days to clear Customs, I guess. Really slow. |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 10-19-2015 10:28 PM
Jer, you center caps arrived today. I stopped at Dick's this afternoon. They will ship out tomorrow. |
trenthanson Prowler Newbie From:Blythewood, South Carolina, USA |
posted 10-21-2015 04:33 AM
I would like to get my center caps repaired too. I have been scared to pop them off to check my lug nuts since I had my tires replaced (2012). I super glued the inside clips back on and used a lot of tape (inside the caps). Do I just send the caps and a check to Dick Linnemann? I live overseas in Belgium, but my mailing address is an APO, so shipping is considered stateside. Thank you ------------------ |
jimsutton POA Site Supporter Prowler Junkie From:Ocala, FL, USA |
posted 10-21-2015 07:33 AM
Here is some thing that works On Prowler Crappy Center caps even with broken tabs it for me that I have used for Years My Prowler and other Prowlers - 3M black strip 1/4 inch calk . It is a rubber calk - Clean cap in side edges place it on the inside edges of the cap edges press the cap back on . you wont see it and It is easy to take back off ..Think about it and could save some money .. |
StingRay POA Site Supporter Prowler Junkie From:Elk Grove Village, IL, USA |
posted 10-21-2015 09:30 AM
quote: ... especially when you get stuck on that windmill hole and keep hitting the twirling blades so often, Ed! |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 10-21-2015 06:19 PM
quote: YES, that is correct. I am not involved, Dick takes care of it all, I am just here for internet support with my vast knowledge of computers. lol |
TucsonJer POA Site Supporter Prowler Junkie From:Tucson, AZ, USA |
posted 10-22-2015 08:19 PM
Yea! I got my center caps back today. Soooo easy to put back on. What a great fix!! Thanks Dick, I truly appreciate the fabulous job you did to fix them and take away the fear of losing one or more of my caps. They look GREAT! Special thanks to you too Ed, you are a wonderful asset to the POA and I hope I get to meet you one day. |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 10-22-2015 09:17 PM
Thanks Jer. I really don't have a whole lot to do with it. I just happen to live in the same city as a truly gifted guy who can solve a problem almost every time. Luckily he owns a Prowler and loves to make life easier for us. |
scottmartin Prowler Enthusiast From:london ontario canada |
posted 02-08-2018 07:34 PM
does anyone know if Dick Linneman still repair the centre caps THX Scott |
Run Red POA Site Supporter Prowler Junkie From:Anna, Ohio, USA |
posted 02-08-2018 09:25 PM
Yes they do,,, fantastic job! Send them directly to Dick Linneman. This message has been edited by Run Red on 02-08-2018 at 09:25 PM |
scottmartin Prowler Enthusiast From:london ontario canada |
posted 02-09-2018 04:41 AM
THX Run Red - will do - most appreciated! Cheers |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 02-09-2018 11:56 AM
He will ship them quickly but sometimes they sit at the border for more than a week at customs, for some reason. Just a heads up. All the info is current for Dick. |
All times are CT (US) Top of Page Previous Page | Return to General Prowler Discussion next newest topic | next oldest topic |
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP