Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
Click here to return to the Prowler Online Board Main Page Topic Closed |
ProwlerOnline, Plymouth/Chrysler Prowler Discussion Forum
General Prowler Discussion computer chip/module
|
Bottom of Page | next newest topic | next oldest topic |
Author | Topic: computer chip/module |
Marty Usher POA Site Supporter Prowler Junkie From:San Antonio, Texas, United States |
posted 07-19-2001 10:08 AM
Has anyone tried the Jet Performance module designed for the 330M on a Prowler yet? I was told to expect 13-15 HP gain at reatr wheels. Tech at Jet said no one there has tested it on Prowler but thought engines were same. Also, I do not understand the difference between installing a computer chip directly and having this unit that mounts under dash with LED readouts and is "wired" through firewall. Can someone educaate me on this subject so I can make an informed decision. Thanks Marty ------------------ |
FatManInTheBathTub Prowler Junkie From:Palm Coast, FL. |
posted 07-19-2001 10:33 AM
Hey now, the prowlers computer is filled with epoxie or something like that so you can't just add a diferent chip......... ------------------ |
PaulR POA Site Supporter Prowler Junkie From:Dallas,Tx., USA |
posted 07-19-2001 12:05 PM
Hey now Jerry- are you sure it's epoxy or something...you know you could be wrong! hehehe ------------------ This message has been edited by PaulR on 07-19-2001 at 12:36 PM |
fortknox82 Prowler Junkie From:Boynton Beach, FL 33436 |
posted 07-19-2001 12:06 PM
I know what you are talking about. Venom Performance make modules like that. What it is, is a little box that you moutn under your hood and it wires into the TPS and MAF or MAP and depending upon application other sensors and such. And then there is a little red LED that runs inside the car so you know when it is working. I installed one on my stealth i use to have but i saw or felt no gain. But that was a venom 400 module. JET might have something better. Can you give more info on the unit and also a price? I might be interested if they could guarantee it. ------------------ Amsoil Engine and Tranny Fluid This message has been edited by fortknox82 on 07-19-2001 at 12:07 PM |
FatManInTheBathTub Prowler Junkie From:Palm Coast, FL. |
posted 07-19-2001 12:11 PM
Hey now Paul, it wouldn't be the first time. I am wrong all the time about alot of things as you know but I also know it takes about 5 minutes to get the crap out of the prowlers computer box..................so its not fool proof..........its the string data that is aluding me.....................I am about as computer dumb as they come................just a ol tater here............ ------------------ |
Marty Usher POA Site Supporter Prowler Junkie From:San Antonio, Texas, United States |
posted 07-19-2001 12:38 PM
Jason- link is www.jetchip.com - doesn't tell much. I called them 714-848-5515. They have this "box" for a 300M for $259.00 I saw comment on webpage for 300M club that one guy has installed and likes perceived change - no real data however and the page had no way to contact the guy. I was hoping someone has tried on Prowler before I become the guiney pig. Marty ------------------ |
fortknox82 Prowler Junkie From:Boynton Beach, FL 33436 |
posted 07-19-2001 04:13 PM
Awwwwwwww cmon, just be the pig....lol. Hey, if it works then i will buy one. I think, what you should try to do is get Jet Chips to give you a gauruntee that if it doesnt meet your expectations that you can give it back for a full refund. If you dont want to do it then i will try to do it and see what the results will be. But i think you should try it since you have been doin the research on it. Do you know how it hooks up? I tried looking at the page but they really dont tell you much. I did email them though for some info. ------------------ Amsoil Engine and Tranny Fluid |
Marty Usher POA Site Supporter Prowler Junkie From:San Antonio, Texas, United States |
posted 07-19-2001 09:06 PM
Jason - tell you what I am going to do. I am working on my interior today and next couple days (carbon fibre dash overlays, leather cat logos in door panels, etc) while I am waiting for Bill Gallagers's shipment with air intake and suspension braces. Also, my trailer hitch is due next week - it was either that or make a choice between my wife and a cooler of beer when tailgating at football this fall !! I ordered some Purple Hornie glass packs and my exhaust guy is fabricating an x-pipe for installation early next week. AFTER all that is done, if we do not find some other sucker to try the thing from JET, I will order. I see where you are going to order G force gears. Are you having second thoughts? That will probably be my next mod. Happy Prowling Marty BTW - How close are to Philadelphia? I will be there for ten days in August. ------------------ |
butchcee POA Site Supporter Prowler Junkie From:Lake Ariel, Pa. |
posted 07-19-2001 09:19 PM
Jason, within the next week or so, I'll have a laptop programable unit hooked up to my Cat. It will adjust injector pulse and spark timing. I'll let you guys know how it worked or didn't when I find out. ------------------ |
fortknox82 Prowler Junkie From:Boynton Beach, FL 33436 |
posted 07-19-2001 10:51 PM
Ok Marty I see how it is I guess ill do some leg work to find out what can be done or cant be done. My kat isnt going to have any down time anytime soon so i guess i will work on it in my free time. As for the gears, i am having second thoughts abouit g-force gears b/c you cant even get them yet. I was told they were going to produce a shipment and i would be notified but that hasnt happened yet. At least at Prowler Pro they can ship it to you over nite and i can have it the next day. Im thinkin about going with that as soon as i get some bills paid. Im about 45 minutes from Philly and you are welcome to come out and stay. Except, is it going to be b4 woodward or after? Im going to be gone August 14 - 22 out at woodward and the nascar race. Just post it up here or email me if my email is working. Al - Tell me how you make out with the laptop and what kind of adjustments you can make to the engine. By the way, can we put a 180 degree thermostat in our kats to make them run cooler and get a little more oomph. I have done it with all my other cars but they have been older FI or Carbs. Keep me updated. And when do you think your kat will be on the road again? ------------------ Amsoil Engine and Tranny Fluid |
Marty Usher POA Site Supporter Prowler Junkie From:San Antonio, Texas, United States |
posted 07-20-2001 06:53 AM
Jason - I have done some leg work already. The following companies have either told my on the phone or by email that they have nothting to help us: ProTech, Hypertech, Superchips, Fastchips, Dyno Sources. I'll-Sho-You Performance has not called or emailed yet. You saw my earlier post about Jet. Finally, Kenne Bell says they are working on a chip now that should be developed by Novemeber. If I get anymore info, I will post. Marty ------------------ |
fortknox82 Prowler Junkie From:Boynton Beach, FL 33436 |
posted 07-20-2001 08:24 AM
Well, maybe ill get a hold of someone at Jet and see if i can get a unit to do a "Test" run for them to see if there will be a possibility of a market for Prowlers. And i will see if i can just buy it and if it doesnt work then i will send it back. Ill see what i can do... ------------------ Amsoil Engine and Tranny Fluid |
All times are CT (US) Top of Page Previous Page | Return to General Prowler Discussion next newest topic | next oldest topic |
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP